Autowatch Ghost Installation
Autowatch Ghost is an immobiliser that safeguards you from hacking and key-cloning. It also helps prevent theft of your vehicle. It can lower your insurance costs and you may even be eligible for incentives.
The Ghost immobiliser, which is discreet and easy to operate is built into the ECU of the vehicle. ghost 2 immobiliser cost makes it impossible for the engine to be started without an unintentional code.
TASSA Approved
Autowatch Ghost is the best method to prevent your car from being taken away by key cloning. It is certified by TASSA. This is the most recent in car security technology and thwarts thieves in two ways. It will stop your car from beginning if your keys have been duplicated, and it will stop you from driving away if they have taken your key fobs.
This device is the next generation and connects to the CAN data network of your vehicle. A personal PIN code can be entered using the standard buttons on the dashboard, or the steering wheel. The Ghost is then able to stop the engine from in starting and can be programmed to a variety of different settings, including Gear Change Blocking, Stall on Start or Lock Gearbox (vehicle dependent). It is undetectable since it doesn't use radio frequencies.
The Ghost is a weatherproof, tiny device and is completely sealed to be hidden in the vehicle or mounted on the dashboard, where it is almost impossible for a thief to find. This is not a Thatcham Category Approved product, but it is regarded by insurance companies as a highly effective anti-theft device. It also comes with 5 years of warranty.
The TASSA verification process assures that any installation work performed on the Ghost will be carried out by a skilled and qualified installer. This gives the customer's, insurers' and police's confidence in the quality installation. It will also guarantee that the installers follow the manufacturer's instructions and install the product correctly. Installers who are members of TASSA have an unwavering dedication to excellence and have made an impact in the fight against crime.
Compatible with a variety of vehicles
The Autowatch Ghost 2 is a cutting-edge immobiliser that is designed to guard your vehicle from modern-day key cloning. The PIN code system of the Autowatch Ghost 2 is incorporated into the vehicle's ECU which makes it difficult for thieves to copy keys or hack into the system. It is also discrete and is able to be easily installed in various vehicles including minivans as well as sports cars. It is also weatherproof, and small enough to be hidden out of sight. This makes it harder for thieves.
The installation procedure for the Ghost is simple and doesn't require any additional wiring. It is compatible with a variety of vehicles and connects to the vehicle's data network CAN. It can also be turned off or disabled by using the main screen of the vehicle. The device is compatible with numerous applications on mobile devices that allow you to control the security of your vehicle remotely.
Despite its many advantages the Ghost has some issues that may be encountered after installation. These problems can be caused by a variety of factors, such as malfunctioning wiring or a non-compliant mobile application. In these situations, the best solution is to consult an expert installer to fix the problem.
Another issue faced by users is difficulty entering the Ghost's disarm sequence. This is usually due users forgetting or not practising the correct sequence. However, the user manual includes an emergency code that can be used in the case of these issues.
Discreet
Autowatch Ghost is a discreet and sophisticated security system that safeguards your vehicle against theft. This device uses the vehicle's CAN data networks to operate and is invisible to thieves, which makes it a highly effective deterrent. It is also able to be triggered by other security systems, like car alarms, and also provides real-time call alerts to the owner. These features can assist police find your vehicle in case it is stolen.
This system is compatible with most vehicles and can be installed in less than an hour. It's a TASSA approved aftermarket device that works with vehicle trackers. Certain insurance companies recognize it. It's also tamper-proof, and quiet so that criminals won't be hearing it operate. The Ghost immobiliser can also be programmed to require a PIN of up to twenty digits. This makes it almost impossible to guess.
Ghost can only be used only when the vehicle is in the Service/Valet Mode. This means that you aren't giving the PIN code to a mechanic or another person who needs to access your vehicle's computer system. The Ghost also comes with a 5-year warranty.
The Autowatch Ghost is a revolutionary immobiliser that can stop key cloning as well as ECU hacking, and car theft. It's an aftermarket CAN bus device that's a great choice for both new and older vehicles. ghost 11 immobiliser to install and runs quietly, which means it can be fitted in any vehicle without cutting wires. It also lets you change your pin number easily so that only you are aware of it. The system also doesn't use codes-grabbing or RF scanning technology which means it's almost unnoticeable.
Easy to use
Autowatch Ghost is an innovative and efficient security system that was designed to stop vehicle theft by shutting off the engine. It is operated by an individual code that is created by the owner of the vehicle. This code has to be entered to allow the car to start. This technology is extremely advanced and enhances the overall security of your vehicle and is a favorite choice for motorists. However, executing this installation requires careful preparation and focus on the details. This includes ensuring compatibility, using a professional's knowledge, adhering legal regulations, and understanding the Ghost II's operating dynamics. Prioritising these aspects ensures a successful installation and optimal functionality.
Contrary to other systems, the Ghost II is silent and is not able to be detected by thieves. It is also weatherproof and small and compact, making it hard to gain entry into your vehicle. It is compatible with CAN, Lenastark and other vehicles. It can be used in vehicles where the battery needs to be isolated to ensure maintenance. The Ghost 2 has a Transport Mode that turns off the device when your vehicle is being rented out or loaned.
Before you can start the Ghost 2, you will have to enter a PIN code that is unique to you. The installer will assign an initial PIN code for you, but for your own security, it is best to change it as soon as possible. The device is able to enter sleep mode to preserve the battery, but if it detects an engine management system, it will wake up and prevent the vehicle from getting started. This feature can be disabled in the Settings menu. It is best to utilize the Ghost immobiliser only when your vehicle is moving and to lock it whenever you leave the vehicle unattended.
Easy to install
The Autowatch Ghost II, an advanced security system, deters car thefts by shutting down a vehicle's engine. It works with a code that is unique to the owner of the vehicle, which makes it a potent deterrent. Installing this device requires a lot of attention to detail and careful preparation. By ensuring compatibility, relying upon experts, adhering to legal regulations and fully understanding the system's dynamics it is possible to make sure that the installation process is smooth and derive the maximum benefit from this security system.
This unique CANbus immobiliser from Autowatch is simple to install and operates silently so criminals cannot hear it working. It uses CAN bus communication to communicate with the vehicle. Compatible with a broad range of vehicles. It's a major breakthrough in the field of vehicle security. It also protects your vehicle from key cloning, hacking and theft of your car, since it will not start without the correct pin code. It is weatherproof and small and therefore it is difficult for criminals to find it or modify it.
To begin using your Ghost Immobiliser You must review the wiring diagram for your vehicle and locate the CAN high (CAN H) and CAN low (CAN L) wires. Connect the CAN high and CAN low wires to the ECU. You can find these wires on the dashboard or near the engine.
It's best to hire an accredited and reliable installer to install your Ghost immobiliser. You can rest assured that the system is installed correctly and won't interfere in the operation of your vehicle. The installer will also be able provide you with guidance on how best to make use of your new device.